New and used Centrifuges
|
Print
|
Cat.-No.
|
Description
|
Price net
|
|
1114
|
Ultra-centrifuge Beckman L7-55, 55.000 rpm, 408.000 g, with internal cooling, built in. 1985, used.
|
5.000,00 € |
|
3027
|
High-speed Refrigerated centrifuge Beckman J2-HC, with a large chamber, analog display, 18.000 rpm, built in. 1993, used.
|
5.250,00 € |
|
5039
|
Low-speed Refrigerated centrifuge Beckman J6-MI, 6.000 rpm, very little used.
|
6.000,00 € |
|
91001
|
Log-book for ultra-rotors. (KB)
|
7,60 € |
|
1006
|
Ultra-centrifuge Beckman L7-65, 65.000 rpm, 485.000 g, water cooling, built in. 1987, used.
|
6.000,00 € |
|
5003
|
Low-speed Refrigerated centrifuge Beckman J6-MC, 6.000 rpm, with Elutriation rotor JE5.0 and chamber 40 ml, very little used.
|
auf Anfrage |
|
91002
|
Log-Book for ultra-centrifuges. (KB)
|
18,30 € |
|
1115
|
Ultra-centrifuge Beckman L7-65, 65.000 rpm, 485.000 g, with internal cooling, built in. 1989, used.
|
6.000,00 € |
|
335148
|
Vacuum grease for rotor O-rings. (B)
|
48,42 € |
|
1135
|
Ultra-centrifuge Beckman L8-70M, 70.000 rpm, 504.000 g, internal cooling, built in. 1989, 26 Bil.., used.
|
7.000,00 € |
|
3022
|
High-speed Refrigerated centrifuge Beckman J2-ME, digital display, 21.000 rpm, built in. 1991, used.
|
4.250,00 € |
|
306812
|
Spinkote thread grease. (B)
|
24,89 € |
|
5036
|
Table-top cooling centrifuge Beckman Allegra-6R, 6.000 rpm, with Swinging Bucket rotor Beckman GH-3.8, 4x750 ml, 96x130 mm, 3.750 rpm, 3.210 g, built in. 2002, used.
|
3.000,00 € |
|
1137
|
Ultra-centrifuge Beckman L8-70M, 70.000 rpm, 504.000 g, water cooling, used.
|
7.500,00 € |
|
3038
|
High-speed Refrigerated centrifuge Beckman Avanti J-20XP, 26.000 rpm, built in. 2001, used.
|
9.250,00 € |
|
339555
|
Rotor cleaning solution 555, bottle for 946 ml. (B)
|
121,30 € |
|
1131
|
Ultra-centrifuge Beckman Optima L-60, 60.000 rpm, 485.000 g, Peltier cooling, very little used.
|
13.000,00 € |
|
3029
|
High-speed Refrigerated centrifuge Beckman Avanti J-25, digital display, 25.000 rpm, 1-phasig, built in. 1997, used.
|
6.500,00 € |
|
347404
|
Brush to clean the rotor holes 6 to 13 mm. (B)
|
41,38 € |
|
1108
|
Ultra-centrifuge Beckman Optima LE-70, 70.000 rpm, 504.000 g, Peltier cooling, built in. 1993, used.
|
13.000,00 € |
|
3030
|
High-speed Refrigerated centrifuge Beckman Avanti J-25, digital display, 25.000 rpm, 3-phasig, built in. 1995, used.
|
5.500,00 € |
|
339379
|
Brush to clean the rotor holes 11 to 25 mm. (B)
|
45,58 € |
|
1083
|
Ultra-centrifuge Beckman Optima L-70, 70.000 rpm, 504.000 g, Peltier cooling, used.
|
12.000,00 € |
|
3035
|
High-speed Refrigerated centrifuge Beckman Avanti J-30I, digital display, 30.000 rpm, max. 108.800 g, built in. 2003, used.
|
8.000,00 € |
|
339380
|
Brush to clean the rotor holes 25 to 38 mm. (B)
|
45,58 € |
|
009-0107
|
Fiberstand, Rotor underlay for all high-speed rotors. (F)
|
113,30 € |
|
1091
|
Ultra-centrifuge Beckman Optima L-70, 70.000 rpm, 504.000 g, Peltier cooling, used.
|
12.000,00 € |
|
1104
|
Ultra-centrifuge Beckman Optima L-70, 70.000 rpm, 504.000 g, Peltier cooling, very little used.
|
14.000,00 € |
|
357442
|
Flat-top Seal Former for Beckman Quick-Seal Tube Sealer. (B)
|
45,30 € |
|
1134
|
Ultra-centrifuge Beckman Optima XL-100K, 100.000 rpm, 802.000 g, Peltier cooling, built in. 2000, very little used.
|
17.000,00 € |
|
358313
|
Tube Topper Kit 50 Hz, consisting of 1x 348117 Heatsink, 2x 348643 Seal Guide, 8x 348120 Former Seal (domed top), 1x Tube Topper and charger, 1x 361668 Tubes pull-out tool. (B)
|
1.102,00 € |
|
1133
|
Ultra-centrifuge Beckman Optima L-100K, 100.000 rpm, 802.000 g, Peltier cooling, built in. 2006, very little used.
|
18.000,00 € |
|
348120
|
Former Seal (domed top), for Tube Topper, per piece. (B)
|
50,00 € |
|
1129
|
Table-top Ultra-centrifuge Beckman TL-100, 100.000 rpm, 550.000 g, built in 1987, used.
|
5.000,00 € |
|
349661
|
Tube Rack (orange) for Tube Topper, 24 space, for 8 mm tubes. (B)
|
190,70 € |
|
1080
|
Table-top Ultra-centrifuge Beckman Optima TL, 100.000 rpm, 550.000 g, built in 1991, hardly used.
|
8.000,00 € |
|
349387
|
Tube Rack (gold) for Tube Topper, 24 space, for 11 mm tubes. (B)
|
208,20 € |
|
1128
|
Table-top Ultra-centrifuge Beckman Optima TLX, 120.000 rpm, 627.000 g, built in 1998, used.
|
9.000,00 € |
|
348122
|
Tube Rack (red) for Tube Topper, 24 space, for 13 mm tubes. (B)
|
140,30 € |
|
1070
|
Table-top Ultra-centrifuge Beckman Airfuge, 100.000 rpm, 148.000 g, used.
|
3.000,00 € |
|
356568
|
Tube Rack (violet) for Tube Topper, 24 space, for 14 mm tubes. (B)
|
174,30 € |
|
1122
|
Ultra-centrifuge Sorvall Combi plus, 80.000 rpm, 602.000 g, water cooling, built in 1993, very little used.
|
auf Anfrage |
|
348123
|
Tube Rack (green) for Tube Topper, 24 space, for 16 mm tubes. (B)
|
141,40 € |
|
348124
|
Tube Rack (blue) for Tube Topper, 18 PLatz, for 25 mm tubes. (B)
|
261,90 € |
|
348125
|
Tube Rack (black) for Tube Topper, 12 space, for 38 mm tubes. (B)
|
106,30 € |
|
10054
|
Stock lots Polyallomer bottle # 334205, for Beckman ultra-rotor Type 19, with closure, 250 ml, 60x121 mm, NEW in original packed, per piece, list price EUR 279,82. (B)
|
125,00 € |
|
10001
|
Removal tool, (Cat.-# 301875), for sealable tubes, used. (B)
|
46,00 € |
|
10055
|
Stock lots plug # 332836 for Beckman Polyallomer bottle 250 ml, # 334205, for rotor Type 19, per piece, NEW. (B)
|
15,00 € |
|
10002
|
Tube-Cap assembly 'short stem', (Cat.-# 303113), for thin-walled tubes 6,5 ml in rotors Type 50.3 Ti, Type 50.4 Ti, unused, per piece. (B)
|
38,00 € |
|
10003
|
Tube-Cap Vice, (Cat.-# 305075), unused. (B)
|
300,00 € |
|
10004
|
Tube-Cap Vice, (Cat.-# 305075), used. (B)
|
200,00 € |
|
10006
|
Tube-Cap assembly titan, (Cat.-# 341968), for thin-walled tubes 13,5 ml in Type 70.1 Ti, . . . . , unused. (B)
|
150,00 € |
|
10007
|
Quick-Seal Spacer bright (Cat.-# 342417), for tubes 39 ml, 25x89 mm, in rotors VTi 50, VC 53 and VAC 50, used. (B)
|
35,00 € |
|
10008
|
Quick-Seal Tube Rack, (Cat.-# 342422), for tubes 39 ml, 25x89 mm, for rotors Type 70 Ti, Type 60 Ti, VTi 50, used. (B)
|
50,00 € |
|
10009
|
Quick-Seal Tube Rack, (Cat.-# 342423), for tubes 5,1 ml, 13x51 mm, in rotors VTi 65.2, NVT 100, NVT 90, NVT 65.2, VTi 90, used. (B)
|
50,00 € |
|
10012
|
Quick-Seal Tube Rack, (Cat.-# 342488), for tubes 13,5 ml, 16x76 mm, in rotors Type 70.1 Ti, Type 50 Ti, VTi 65.1, used. (B)
|
50,00 € |
|
10013
|
Quick-Seal Tube Rack, (Cat.-# 342642), for tubes 33 ml, 25x86 mm, in rotors Type 70 Ti, Type 60 Ti, SW 28, . . ., used. (B)
|
50,00 € |
|
10014
|
Quick-Seal Spacer red, (Cat.-# 342695), for tubes 13,5 ml, in rotor Type 70.1 Ti, hardly used. (B)
|
25,00 € |
|
10015
|
Quick-Seal Spacer bright, (Cat.-# 342696), for tubes 13,5 ml, in rotors Type 50 Ti, Type 65, hardly used. (B)
|
25,00 € |
|
10016
|
Quick-Seal Spacer red, (Cat.-# 342699), for tubes 39 ml, in rotors Type 70 Ti, Type 60 Ti, Type 55.2 Ti, Type 50.2 Ti, hardly used, per piece. (B)
|
49,00 € |
|
10017
|
Quick-Seal Spacer red, (Cat.-# 342699), for tubes 39 ml, in rotors Type 70 Ti, Type 60 Ti, Type 55.2 Ti, Type 50.2 Ti, . . . . , unused, per pieceT. (B)
|
84,40 € |
|
10018
|
Floating spacer black, (Cat.-# 343448), for Quick-Seal tubes 15 ml or 27 ml, in rotors VTi 50, VC 53 and VAC 50, unused, per piece. (B)
|
45,00 € |
|
10019
|
Quick-Seal Tube Rack, (Cat.-# 344641), for tubes 10 ml, 16x67 mm, for rotors Type 70.1 Ti, Type 50 Ti, VTi 65.1, SW 28.1, used. (B)
|
30,00 € |
|
10020
|
Quick-Seal Floating spacer, (Cat.-# 345828), for tubes 6,3 ml / 4,2 ml, for rotors Type 40, Type 50 Ti, Type 65, Type 70.1 Ti, Type 75 Ti, Type 80 Ti, Type 90 Ti, unused. (B)
|
20,00 € |
|
10021
|
Tube-Cap assembly, (Cat.-# 346256), with 'filling hole', for thin-walled tubes 6,5 ml, in rotors Type 50.3 Ti, Type 50.4 Ti, unused. (B)
|
75,00 € |
|
10022
|
Microtiter plate carrier, (Cat-# 356412), for Beckman rotor GH-3.7, set of 2 pieces, nearly new. (B)
|
400,00 € |
|
10023
|
Quick-Seal Tube Rack, (Cat.-# 356892), for tubes 4,2 ml, 16x32 mm, for rotors Type 70.1 Ti, Type 50 Ti, used. (B)
|
25,00 € |
|
10024
|
Quick-Seal Tube Rack, (Cat.-# 357891), for tubes 5,9 ml, 16x47 mm, for rotors SW 40 Ti, SW 41 Ti, used. (B)
|
25,00 € |
|
10025
|
Microtiter plate carrier, (Cat.-# 358680), for rotors JS-5.2/JS-4.0, set of 2 pieces. (B)
|
auf Anfrage |
|
10026
|
Microtiter plate carrier, (Cat.-# 361304), for rotors GH-3.8/JS-4.3, set of 2 pieces. (B)
|
auf Anfrage |
|
10027
|
Buckets (362216) in Beckman Swinging Bucket rotor JS-7.5 for 250 ml bottles 62x136 mm, 7.500 rpm, 8.950 g, set of 2 pieces, nearly new.
|
500,00 € |
|
10028
|
Hex Driver, (Cat.-# 841883), for 7/16 in. (11 mm), unused. (B)
|
auf Anfrage |
|
10029
|
Hex Driver, (Cat.-# 841884), for 5/16 in. (8 mm), unused. (B)
|
auf Anfrage |
|
10030
|
Troque Wrench, (Cat.-# 858121), 120 in.-lb. for rotors VTi 80, VTi 65.2, VTi 65.1, . . ., used. (B)
|
200,00 € |
|
10031
|
Spacer blue, (Cat.-# 349289), for Quick-Seal tubes 16x76 mm, in rotors VTi 65.1, NVT 65, per piece. (B)
|
30,00 € |
|
10032
|
Removal tool (Cat.-# 338765), for all floating and OptiSeal - Spacer,. (B)
|
25,00 € |
|
10033
|
Closure of Al/Ti, for thin-walled tubes 25x83 mm, (Cat.-# 337927),für rotor Type 70 Ti, per piece. (B)
|
100,00 € |
|
10034
|
Closure of Al, (Cat.-# 331151), for thin-walled tubes 25x89 mm, per piece. (B)
|
50,00 € |
|
10035
|
Closure of Al, (Cat.-# 330860), for thin-walled tubes 16x76 mm, per piece. (B)
|
50,00 € |
|
10036
|
Closure of Al, (Cat.-# 303319), for steel tubes 16x76 mm, per piece. (B)
|
50,00 € |
|
10037
|
Floating spacer, (Cat.-# 360270), for Quick-Seal tubes 13 mm ø, in rotors TLA-100.3, TLA-100.4, per piece. (B)
|
15,00 € |
|
10038
|
Floating spacer, (Cat.-# 355536), for Quick-Seal tubes 25 mm ø in Swinging Bucket rotor, for SW 28, SW 27, SW 32 Ti, per piece. (B)
|
15,00 € |
|
10039
|
Floating spacer, (Cat.-# 355534), for Quick-Seal tubes 14 mm ø in Swinging Bucket rotor, for SW 41, SW 40, per piece. (B)
|
15,00 € |
|
10040
|
Closure of Al, for thick-walled tubes 16x76 mm, (Cat.-# 338907), per piece. (B)
|
auf Anfrage |
|
10041
|
Floating spacer, (Cat.-# 344636), for Quick-Seal tubes 11 mm ø, in rotors TLA-100.2, TLA-120.2, per piece. (B)
|
auf Anfrage |
|
10042
|
Removal tool (Cat.-# 303419), for Delrin adapter, not for con. Adaptors. (B)
|
25,00 € |
|
10048
|
Tube pull-out tool, (Cat.-# 342419), for Quick-Seal tubes. (B)
|
30,00 € |
|
10052
|
Multi-Disk Adapter blue (# 359469/359148), per 37 tubes 3-5 ml, 12x110 mm, in bore 101 mm ø, Pack of 2. (B)
|
125,00 € |
|
10049
|
Multidisk Adapter # 359475, for each 4 conical 'Falcon'-tubes 50 ml, 29x103 mm, in rotor GH-3.7/GH-3.8/JS-4.3, Pack of 2, used.
|
100,00 € |
|
10053
|
Multidisk Adapter # 359472, for each 14 conical 'Falcon'-tubes 15 ml, 18x120 mm, in rotor GH-3.7/GH-3.8, Pack of 2, used.
|
100,00 € |
|
10050
|
Cannister closure Assembly (Cat.-# 360842), used, per piece
|
200,00 € |
|
105-925-IR
|
SW 28/SW 32 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-925-I/R
|
SW 28/SW 32 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-916-IR
|
SW 28.1/SW 32.1 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-916-I/R
|
SW 28.1/SW 32.1 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-914A-IR
|
SW 41 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-914A-I/R
|
SW 41 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-914B-IR
|
SW 40 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-914B-I/R
|
SW 40 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-913-IR
|
SW 55 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-913-I/R
|
SW 55 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-911A-IR
|
SW 60 Ti tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-911A-I/R
|
SW 60 Ti tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-911B-IR
|
TLS-55 tube holder for Gradient former, with long (rate zonal) and short (isopycnic) caps.
|
auf Anfrage |
|
105-911B-I/R
|
TLS-55 tube holder for Gradient former, with long (rate zonal) or short (isopycnic) caps.
|
auf Anfrage |
|
105-525-6
|
Replacement-caps long, rate zonal, SW 28/SW 32 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-425-6
|
Replacement-caps short, isopycnic, SW 28/SW 32 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-516-6
|
Replacement-caps long, rate zonal, SW 28.1/SW 32.1 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-416-6
|
Replacement-caps short, isopycnic, SW 28.1/SW 32.1 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-514-6
|
Replacement-caps long, rate zonal, SW 40 Ti/SW 41 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-414-6
|
Replacement-caps short, isopycnic, SW 40 Ti/SW 41 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-513-6
|
Replacement-caps long, rate zonal, SW 50.1/SW 55 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-413-6
|
Replacement-caps short, isopycnic, SW 50.1/SW 55 Ti, package of 6 pieces.
|
auf Anfrage |
|
105-511-6
|
Replacement-caps long, rate zonal, SW 60 Ti/TLS-55, package of 6 pieces.
|
auf Anfrage |
|
105-411-6
|
Replacement-caps short, isopycnic, SW 60Ti/TLS-55, package of 6 pieces.
|
auf Anfrage |
|
151-125
|
SW 28/SW 32 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-116
|
SW 28.1/SW 32.1 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-114A
|
SW 41 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-114B
|
SW 40 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-113
|
SW 50.1/SW 55 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-111A
|
SW 60 Ti Fractionator tube holder.
|
auf Anfrage |
|
151-111B
|
TLS-55 Fractionator tube holder.
|
auf Anfrage |
|
101.03
|
Comb, 13 pockets, 1.0 mm, with support
|
auf Anfrage |
|
101.04
|
Comb, 13 pockets, 1.0 mm, w/o support
|
auf Anfrage |
|
101.05
|
Spacer-set 1.0 mm
|
auf Anfrage |
|
101.06
|
Glass-plate-set 80x100 mm, for MTV-1, for sealing with spacers.
|
auf Anfrage |
|
101.07
|
Round-gel-adapter 2DRM ( 6 tubes AD 2,2 identical 1,6 L 75 mm)
|
auf Anfrage |
|
101.08
|
Glass-tube-set (12 pieces)
|
auf Anfrage |
|
101.10
|
Gel Caster GMTV2 for max. 4 gels, incl. 2 GP-sets 101.11
|
auf Anfrage |
|
101.11
|
Glass-plate-set 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for Gel Caster GMTV2.
|
auf Anfrage |
|
101.20
|
Glass-plate-set 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for Gel Caster GMTV2, incl. 4 clamps.
|
auf Anfrage |
|
101.21
|
ear-plate' 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for Gel Caster GMTV2.
|
auf Anfrage |
|
101.22
|
Glass-plate-set 80x100 mm, for MTV-1, for sealing with spacers, incl. 4 clamps.
|
auf Anfrage |
|
101.23
|
ear-plate' 80x100 mm, for MTV-1, for sealing with spacers.
|
auf Anfrage |
|
101.24
|
Glass-plate-set 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for sealing with a rubber hose, incl. 4 clamps and Rubber-tube.
|
auf Anfrage |
|
101.25
|
Glass-plate-set 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for sealing with a rubber hose.
|
auf Anfrage |
|
101.26
|
ear-plate' 80x100 mm, for MTV-1 with glued Glas-spacers 1 mm, for sealing with a rubber hose.
|
auf Anfrage |
|
101.27
|
Rubber-tube for MTV-1, price per running meter
|
auf Anfrage |
|
101.28
|
Glas-plate 80x100 mm, for MTV-1.
|
auf Anfrage |
|
101.29
|
Plastic-clamp for MTV-1-Platten, per piece.
|
auf Anfrage |
|
101.30
|
Replacement clamp for holding the plates in the MTV-1-chamber.
|
auf Anfrage |
|
201.10
|
MTV-20 Mini-twin-vertical - extra wide - plate size 10 x 20 cm ( H x B ) complete with 2 26-Taschen-Kämmen 1.0 mm, 2 glas-plate-sets, 2 spacer-sets 1.0 mm, 4 clamps
|
auf Anfrage |
|
201.11
|
Comb 26 pockets 1.0 mm
|
auf Anfrage |
|
201.12
|
Comb 26 pockets 1.5 mm
|
auf Anfrage |
|
201.13
|
Spacer-set 1.0 mm
|
auf Anfrage |
|
201.14
|
Spacer-set 1.5 mm
|
auf Anfrage |
|
201.15
|
Glass-plate-set
|
auf Anfrage |
|
201.16
|
Clamps-set
|
auf Anfrage |
|
102.02
|
Comb, 10 pockets 1.0 mm
|
auf Anfrage |
|
102.03
|
Comb, 15 pockets 1.0 mm
|
auf Anfrage |
|
102.04
|
Comb, 20 pockets 1.0 mm
|
auf Anfrage |
|
102.05
|
Comb, 10 pockets 1.5 mm
|
auf Anfrage |
|
102.06
|
Comb, 15 pockets 1.5 mm
|
auf Anfrage |
|
102.07
|
Comb, 20 pockets 1.5 mm
|
auf Anfrage |
|
102.08
|
Spacer-set 1.0 mm
|
auf Anfrage |
|
102.09
|
Spacer-set 1.5 mm
|
auf Anfrage |
|
102.10
|
Glass-plate-set
|
auf Anfrage |
|
102.11
|
Round-gel-adapter 2DR 17 (7 tubes AD 6, identical 3, L 130 mm)
|
auf Anfrage |
|
102.12
|
Glass-tube-set (10 pieces)
|
auf Anfrage |
|
102.13
|
Clamps-set (8 pieces)
|
auf Anfrage |
|
102.14
|
Gel Caster GTV 17 for 4 gels
|
auf Anfrage |
|
102.15
|
Cooling device for TV 17
|
auf Anfrage |
|
103.02
|
Comb, 12 pockets, 1.0 mm
|
auf Anfrage |
|
103.03
|
Comb, 18 pockets, 1.0 mm
|
auf Anfrage |
|
103.04
|
Comb, 24 pockets, 1.0 mm
|
auf Anfrage |
|
103.05
|
Comb, 12 pockets, 1.5 mm
|
auf Anfrage |
|
103.06
|
Comb, 18 pockets, 1.5 mm
|
auf Anfrage |
|
103.07
|
Comb, 24 pockets, 1.5 mm
|
auf Anfrage |
|
103.08
|
Spacer-set 1.0 mm
|
auf Anfrage |
|
103.09
|
Spacer-set 1.5 mm
|
auf Anfrage |
|
103.10
|
Glass-plate-set
|
auf Anfrage |
|
103.11
|
Round-gel-adapter 2DR 21 (8 tubes AD 6, identical 3, L 150 mm)
|
auf Anfrage |
|
103.12
|
Gas tube set ( 10 pieces)
|
auf Anfrage |
|
103.13
|
Clamps-set ( 8 pieces )
|
auf Anfrage |
|
103.14
|
Gel Caster GTV 21 for 4 gels
|
auf Anfrage |
|
103.15
|
Establishment of the cooling capability for TV 21 with external cooling.
|
auf Anfrage |
|
104.02
|
Comb 20 pockets 1.0 mm
|
auf Anfrage |
|
104.03
|
Comb 30 pockets 1.0 mm
|
auf Anfrage |
|
104.04
|
Comb 20 pockets 1.5 mm
|
auf Anfrage |
|
104.05
|
Comb 30 pockets 1.5 mm
|
auf Anfrage |
|
104.06
|
Glass-plate-set 300 x 300 mm
|
auf Anfrage |
|
104.07
|
Glass-plate-set 300 x 400 mm
|
auf Anfrage |
|
104.08
|
Clamps-set ( 6 pieces )
|
auf Anfrage |
|
113.03
|
Comb, 8 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
113.04
|
Comb, 12 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
113.05
|
Comb, 8 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
113.06
|
Comb, 12 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
113.07
|
Comb, 8 pockets 2.0 mm ( Delrin )
|
auf Anfrage |
|
113.08
|
Comb, 12 pockets 2.0 mm ( Delrin )
|
auf Anfrage |
|
113.09
|
Comb, preparative, 2 pockets 1.5 mm
|
auf Anfrage |
|
113.10
|
Comb, 8 pockets 1.0 mm, Multi-channel pipette
|
auf Anfrage |
|
113.11
|
Comb, 8 pockets 1.5 mm, Multi-channel pipette
|
auf Anfrage |
|
113.12
|
Geltray, transparent 95 x 85 mm
|
auf Anfrage |
|
114.04
|
Comb 8 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
114.05
|
Comb 14 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
114.06
|
Comb 20 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
114.07
|
Comb 8 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
114.08
|
Comb 14 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
114.09
|
Comb 20 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
114.10
|
Comb preparative 2 pockets 1.5 mm
|
auf Anfrage |
|
114.11
|
Comb 15 pockets 1.0 mm Multi-channel pipette
|
auf Anfrage |
|
114.12
|
Comb 15 pockets 1.5 mm Multi-channel pipette
|
auf Anfrage |
|
114.13
|
Comb 30 pockets 1.0 mm Multi-channel pipette
|
auf Anfrage |
|
114.14
|
Comb 30 pockets 1.5 mm Multi-channel pipette
|
auf Anfrage |
|
114.15
|
Geltray, transparent 150 x 140 mm
|
auf Anfrage |
|
115.06
|
Comb, 14 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
115.07
|
Comb, 22 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
115.08
|
Comb, 14 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
115.09
|
Comb, 22 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
115.10
|
Comb, 14 pockets 3.0 mm ( Delrin )
|
auf Anfrage |
|
115.11
|
Comb, 22 pockets 3.0 mm ( Delrin )
|
auf Anfrage |
|
115.12
|
Comb, 20 pockets 1.0 mm for Multi-channel pipette
|
auf Anfrage |
|
115.13
|
Comb, 20 pockets 1.5 mm for Multi-channel pipette
|
auf Anfrage |
|
115.14
|
Comb, 40 pockets 1.0 mm for Multi-channel pipette
|
auf Anfrage |
|
115.15
|
Comb, 40 pockets 1.5 mm for Multi-channel pipette
|
auf Anfrage |
|
115.16
|
Geltray, transparent 250 x 180 mm
|
auf Anfrage |
|
115.20
|
Comb 10 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
115.21
|
Comb 16 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
115.22
|
Comb 24 pockets 1.0 mm ( Delrin )
|
auf Anfrage |
|
115.23
|
Comb 10 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
115.24
|
Comb 16 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
115.25
|
Comb 24 pockets 1.5 mm ( Delrin )
|
auf Anfrage |
|
115.26
|
Comb 22 pockets 1.0 mm Multi-channel pipette
|
auf Anfrage |
|
115.27
|
Comb 22 pockets 1.5 mm Multi-channel pipette
|
auf Anfrage |
|
115.28
|
Comb 44 pockets 1.0 mm Multi-channel pipette
|
auf Anfrage |
|
115.29
|
Comb 44 pockets 1.5 mm Multi-channel pipette
|
auf Anfrage |
|
114.30
|
Geltray for MIDI-B
|
auf Anfrage |
|
115.30
|
Geltray for MAXI-B
|
auf Anfrage |
|
91-115
|
Combs with different dimensions
|
auf Anfrage |
|
106.07
|
Graphite electrodes 180 x 180 mm (2 pieces )
|
auf Anfrage |
|
106.08
|
Graphite electrodes 180 x 400 mm (2 pieces )
|
auf Anfrage |
|
106.09
|
Gel holder for PT 1 170 x 210 mm
|
auf Anfrage |
|
106.10
|
Foam pads ( 2 pieces ) 170 x 210 mm
|
auf Anfrage |
|
106.11
|
Gel holder for PT MINI 80 x 100 mm
|
auf Anfrage |
|
106.12
|
Foam pads ( 2 pieces ) 80 x 100 mm
|
auf Anfrage |
|
|